Unison Research Hybrid Amplifiers
Unico 150 Hybrid Integrated Amplifier
The Unico 150 amplifier has been designed to suit both high-end audiophile and highly scientific criteria. This dual-approach to development has led to the creation of a product that is different to anything Unison Research – or any other manufacturer – have developed before: a powerful, great-sounding amplifier with only three stages (two tube stages and one power MOSFET stage).
Unico 150 integrated Amplifier Specifications
Output power: 150+150 W RMS at 8Ω / 220+220 W RMS at 4Ω
Frequency response: -1dB @ 12Hz & 45kHz, -3 dB @ 6Hz & 80 kHz
Input impedance: 24kΩ // 100pF
Input sensitivity: 860mV RMS
Input stage: Pure A class, double triode totem pole ECC83
Driver stage: Pure A class, double triode totem pole 6H30
Output stage: Class AB thermostable, complementary Hexfet (4 pairs for channel)
Input: 6 line (3 unbalanced, 2 balanced, 1 “bypass” unbalanced)
Line Outputs: 1 tape, 1 sub (volume controlled)
Output connectors: 4 + 4 bi-wiring
Global Feedback factor: 0 dB
Local Feedback factor: 16 dB
THD: < 0.15% @ 1kHz, 1 W
< 0.25% @ 1kHz, 10 W
< 0.35% @ 1kHz, 100 W
< 0.9% da 20 a 20000 Hz, 150 W
Output resistance: <0.4Ω, resistive on all audio frequencies
Power Consumption: 550 W (at max power on 8 ohm)
Dimensions: 43.5 cm x 18 cm x 44 cm
Net weight: 25 kg
Unico 90 Hybrid Integrated Amplifier
Unico 90 is a class AB hybrid integrated amplifier with zero feedback, as the most precious valve amplifiers uses only two stages. The heart of the Unico 90 circuit is found in its hybrid structure. All of the gain, and subsequently the “character” of the amp, is determined by the only tube stage made with ECC83 and ECC 81in particular multiple-parallel-totem-pole.
Unico 90 integrated Amplifier Specifications
Output power: 100+100 W RMS su 8Ω / 160+160 W RMS su 4Ω
Frequency response: -1dB @ 12Hz e 45kHz -3 dB
Input impedance: 21Kohm // 300pF
Input sensitivity: 860mV RMS
Input stage: Pure A class, double triode totem pole ECC83 and parallel totem pole ECC81 This single stage due to the particular circuitry is able to amplify the input signal and drive directly the power stage.
Output stage: Class AB thermostable, complementary Hexfet (3 pairs for channel)
Number of stage: 2, This amplifier due to the particular circuitry is realized by only two stages: input stage and output stage, and use only local feedback
Input: 6 line (3 unbalanced, 2 balanced, 1 “bypass” unbalanced)
Line Outputs: 1 tape, 1 sub (volume controlled)
Output connectors: 4 + 4 bi-wiring
Global Feedback factor: 0 dB
THD: < 0.15% @ 1kHz, 1 W
< 0.5% @ 1kHz, 10 W
Output resistance: <0.4 ohm, resistive on all audio frequencies
Power Consumption: 550 W (at max power on 8 ohm)
Dimensions: 43.5cm x 44 cm x 18 cm h
Net weight: 20 kg
Unico Due Hybrid Integrated Amplifier
Unico Due is the latest amplifier from Unison Research. Unico Due benefits from Unison Research’s decades of experience in design and production technology. It maintains all the best qualities that made its predecessor a runaway success and introduces new and enhanced features.
Unico Due integrated Amplifier Specifications
Output power: 100+100W RMS into 8 Ohms, 180+180W RMS into 4 Ohms, 290W+290W RMS into 2 Ohms
Filter capacitance: 80,000uF
Output stage: Dynamic Class A power BJT double complementary pair, “Super-Symmetric” configuration
Biasing: Dynamic Class A
Valves: 2 x ECC83 (12AX7)
Inputs: 3 analogue line (RCA), 1 digital (USB), 1 tape RCA
Analogue line Outputs: 1 tape (RCA), 1 stereo subwoofer (RCA), 1 DAC
Dimensions: 43.5 x 43 x 13 cm (W x D x H)
Unico Nuovo Hybrid Integrated Amplifier
Unico Due is the latest amplifier from Unison Research. Unico Due benefits from Unison Research’s decades of experience in design and production technology. It maintains all the best qualities that made its predecessor a runaway success and introduces new and enhanced features.
Unico Nuovo integrated Amplifier Specifications
Output Power: 95W RMS/ 8Ohm
Frequency response: -0.1dB @ 10Hz, -0.5dB @ 100kHz
Input Impedance: 50kOhm // 47pF
Sensibility: 260mV RMS
Input stage: Pure A Class, parallel Valve stage: ECC83/12AX7
Output stage: Dynamic A Class POWER MOSFET complementary
Input: 5 Line RCA (1 phono optional)
Line Output: 1 tape, 1 sub (with volume control)
Output Connector: 4 + 4 bi-wiring
Feedback factor: 10dB
THD: 0.15% @ 10W/1kHz
Power consuption: 400W max
Size: 43.5cm x 9.5cm x 43cm
Weight: 16kg
Unico Primo Hybrid Integrated Amplifier
The Primo is a stereo integrated amplifier that offers elegant lines and details, thanks to carefully considered surface finishes and proportions. Solid construction, careful selection of components and precise assembly are part of an almost artisan approach to amplifier design, reflecting our origins in Treviso. Unison Reasearch has concentrated all of our experience, knowledge and ambition into a small amplifier—one that includes all the technology and passion that one usually finds in the finest flagship products.
Unico Primo integrated Amplifier Specifications
Output power: >80W RMS on 8Ω
Output stage: Dynamic A Class POWER MOSFET complementary pair
Polarization: Classe A Dinamic
Input stage: Triodi A-Class A
Valve: 1 x ECC83 (12AX7)
Sensibilty: 260mV
Input impedance: 50 kΩ / 47 pF
Frequency response: -0.1dB@10Hz / -0.5dB@100kHz
SNR: 90dB
THD: 0.15% @ 10W, 1kHz
Negative feedback: 10dB
Damping Factor: >50
Inputs: 5 line RCA, 1 tape RCA
Output: 1 tape RCA, 1 subwoofer RCA
Output connectors: 4 +4 per Bi-Wiring
Remote control: Volume, IR
Power consumption: 380W max
Dimensions (la x lu x alt): 43.5 x 43 x 9.5 cm
Net weight: 14 kg
Keep In Touch