Plinius Integrated Amplifiers

Back to Plinius
Back to amplifiers
Back to home
Plinius_Hautonga_front

Plinius Hautonga Integrated Amplifier

The versatile Hautonga is a perfectly equipped and well-balanced piece that derives from preceding development in earlier Plinius integrated amplifiers. The aesthetic is the distinctive Plinius rounded front and it is available in silver or black linished anodized finish.

Plinius Hautonga Integrated Amplifier Specifications

POWER

200 watts RMS per channel into 8 ohms.
280 watts RMS per channel into 4 ohms.
Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion

FREQUENCY RESPONSE

20Hz to 20kHz ±0.2dB
-3dB at 5Hz and -3dB at 70kHz

DISTORTION

Typically <0.05% THD at rated power
0.2% THD and IM worst case prior to clipping

CURRENT OUTPUT

40A short duration peak per channel
Fuse protected

SLEW RATE

50V/µs

HUM & NOISE

90dB below rated output 20Hz to 20kHz unweighted

INPUT IMPEDENCE

47k ohms all inputs
Phono adjustable to 47k ohms, 470 ohms,
100 ohms,47 ohms, 22 ohms

RATED PRE OUT LEVEL

1.5V RMS into 47k ohms or higher

PRE OUT SOURCE IMPEDENCE

Typically 1.5k ohms

PRE OUT MINIMUM RECOMMENDED LOAD

47k ohms

LINE OUT LEVEL

190mV at 200 ohms

GAIN

Line inputs to speaker out: 40dB
Phono Input To Pre-Out: 66dB on high gain, 60dB on low gain

POWER/CURRENT CONSUMPTION

600W
0.4A (92W)
Class AB Idle 0.14A (32W) Standby

DIMENSIONS

Height: 120mm (4 3/4″)
Width: 450mm (17 3/4″)
Depth: 400mm (15 3/4″)
Weight: 14kg (30lb)