Tannoy Speakers

Eaton $3,850.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• Heritage 2 way book-shelf loudspeaker based on famous HPD design for medium sized rooms
• Dual Concentric driver based on famous HPD 1974 pedigree technology provides class-leading coherence and point-source imaging
• Sophisticated crossover network with 2 separate channels perfectly complements Dual Concentric driver for truly natural sound
• Front mounted control panel houses 2 band energy control with boost and attenuation compensation for room design and tailoring to personal preference
• Highly efficient 10″ driver with 400-Watt power handling delivers breathtaking dynamics and realism

• Heavy duty 24 carat multi-layer gold plated Tannoy customized binding posts for optimum signal transmission and integrity
• 12 mm coupling rubber pads provide stability and dissipate unwanted energy
• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• Extensive bracing incorporates DMT (Differential Materials Technology) for coupling drivers to cabinets
• Tannoy – 90 years of British sound heritage and innovation
• 10-Year Warranty program*
• Designed and manufactured in the U.K.

Specifications

System

Frequency Response 38 Hz – 30 kHz ±6 dB
Recommended Amplifier Power 20 – 250 W
Power handling (IEC) 125 W continuous, 500 W peak
Sensitivity 91 dB (1 W @ 1 m)
Impedance 8 Ω
Components
Low-Frequency Dual Concentric 1 x 12″ (300 mm) Paper pulp cone
with twin roll impregnated fabric surround.
52 mm (2″) edge wound voice coil
High Frequency Dual Concentric 1 x 1.3″ (33 mm) aluminium/magnesium
alloy dome with edge-wound voice coil
Crossover Frequency 1.2 kHz
Type Bi-wired, hard wired passive, low loss
2nd order low pass, 1st order high pass
Adjustment ±3 dB over 1 kHz to 30 kHz shelving,
2 dB to -6 dB per octave over 5 kHz to 30 kHz slope

Enclosure

Type Twin distributed port
Volume 58 Liters (2.05 cu.ft)
Connectors 5 x 4 mm 24ct WBT binding posts
Dimensions (H x W x D) 860 x 448 x 260 mm (33.9 x 17.6 x 10.2″)
Net weight 29 kg (63.8 lbs)
Construction 19 mm (3/4″) Chipboard with plywood
internal bracing – heavily damped
Finish Walnut veneer and high acoustic transparency nylon grill cover

Accessory Pack

Bi-wire bridge connectors
Prestige wood wax
Carpet protectors
Adjustable feet

Cheviot $4,550.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• Heritage 2 way floor-standing loudspeaker based on famous HPD design for large sized rooms
• Cabinet design and components provide authentic reproduction of original HPD loudspeaker system
• Dual Concentric driver based on famous HPD 1974 pedigree technology provides class-leading coherence and point-source imaging
• Sophisticated crossover network with 2 separate channels perfectly complements Dual Concentric driver for truly natural sound
• Front mounted control panel houses 2 band energy control with boost and attenuation compensation for room design and tailoring to personal preference
• Highly efficient 12″ driver with 500-Watt power handling delivers breathtaking dynamics and realism
• Wide frequency range with fast transient response provides exceptionally natural audio reproduction

• Heavy duty 24 carat multi-layer gold plated Tannoy customized binding posts for optimum signal transmission and integrity
• 8 mm floor coupling spikes provide stability and dissipate unwanted energy
• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• High density cabinet provides extreme rigidity to control low frequency performance
• Extensive bracing incorporates DMT (Differential Materials Technology) for coupling drivers to cabinets
• Tannoy – 90 years of British sound heritage and innovation
• Designed and manufactured in the U.K.

Specifications

System

Frequency Response 40 Hz – 30 kHz ±6 dB
Recommended Amplifier Power 20 – 200 W
Power handling (IEC) 100 W continuous, 400 W peak
Sensitivity 89 dB (1 W @ 1 m)
Impedance 8 Ω
Components
Low Frequency Dual Concentric 1 x 10″ (254 mm) Paper pulp cone with
twin roll impregnated fabric surround.
52 mm (2″) edge wound voice coil
High Frequency Dual Concentric 1 x 1.3″ (33 mm) aluminium/magnesium
alloy dome with edge-wound voice coil
Crossover
Frequency 1.2 kHz
Type Bi-wired, hard wired passive, low loss
2nd order low pass, 1st order high pass
Adjustment ±3 dB over 1 kHz to 30 kHz shelving,
2 dB to -6 dB p

Enclosure

Type Twin distributed port
Volume 30 Liters (1.06 cu.ft)
Connectors 5 x 4 mm 24ct WBT binding posts
Dimensions (H x W x D) 538 x 376 x 250 mm (21.2 x 14.8 x 9.8″)
Net weight 20 kg (44.1 lbs)
Construction 19 mm (3/4″) Chipboard with plywood
internal bracing – heavily damped
Finish Walnut veneer and high acoustic
transparency nylon grill cover

Accessory Pack

Bi-wire bridge connectors
Prestige wood wax
12 mm coupling rubber pads

Arden $5,600.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• Heritage 2 way floor-standing loudspeaker based on famous HPD design for large rooms
• Original cabinet design and components provide a genuine reproduction of the break-though product
• Dual Concentric driver based on the famous HPD 1974 pedigree technology provides class-leading coherence and point-source imaging
• Sophisticated crossover network with 2 separate channels perfectly complements the Dual Concentric driver for a truly natural sound
• Front mounted control panel houses a 2 band energy control with boost and attenuation compensation for room design and tailoring to personal preference
• Highly efficient 15″ driver with 600 Watt power handling delivers breath-taking dynamics and realism
• Wide frequency range with excellent transient response results in natural reproduction and an almost total lack of colouration

• Heavy duty 24 carat multi-layer gold plated Tannoy customized binding posts for optimum signal transmission and integrity
• 8 mm floor coupling spikes provide stability and dissipate unwanted energy
• Fifth binding post provides grounding to reduce radio frequency interference and improve mid range clarity
• High density cabinet provides extreme rigidity to control low frequency performance
• Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets
• Tannoy – 90 years of British sound heritage and innovation
• Designed and manufactured in the U.K.

Specifications

System

Frequency Response 35 Hz – 30 kHz ±6 dB
Recommended Amplifier Power 20 – 300 W
Power handling (IEC) 150 W continuous, 600 W peak
Sensitivity 93 dB (1 W @ 1 m)
Impedance 8 Ω
Components
Low Frequency Dual Concentric 1 x 15″ (380 mm) Paper pulp cone
with single roll rubber surround.
52 mm (2″) edge wound voice coil
High Frequency Dual Concentric 1 x 1.3″ (33 mm) aluminium/magnesium
alloy dome with edge-wound voice coil
Crossover
Frequency 1.1 kHz
Type Bi-wired, hard wired passive, low loss
2nd order low pass, 1st order high pass
Adjustment ±3 dB over 1 kHz to 30 kHz shelving,
2 dB to -6 dB per octave over 5 kHz to 30 kHz slope

Enclosure

Type Triple distributed port
Volume 127 Liters (4.48 cu.ft)
Connectors 5 x 4 mm 24ct WBT binding posts
Dimensions (H x W x D) 910 x 602 x 362 mm (35.8 x 23.7 x 14.3″)
Net weight 41 kg (90.2 lbs)
Construction 19 mm (3/4″) Chipboard with plywood
internal bracing – heavily damped
Finish Walnut veneer and high acoustic
transparency nylon grill cover

Accessory Pack

Bi-wire bridge connectors
Prestige wood wax
Carpet protectors
Adjustable feet

Autograph Mini $1,400.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• 2 way stand mount loudspeaker for small sized rooms
• A miniature and authentic recreation of the famous 1950’s Tannoy AUTOGRAPH design
• Dual Concentric driver technology provides class-leading coherence and point-source imaging
• 4″ driver with 200 Watt peak power handling delivers incredible dynamics for the size of enclosure
• Point source Tulip Waveguide with symmetrical dispersion for accurate stereo imaging
• 19 mm titanium dome driver provides exceptional wideband high frequency clarity and articulation
• Handcrafted, oiled walnut veneered cabinet with solid walnut trim provides a unique and timeless piece of furniture
• Low frequency paper pulp cone with rubber surround provides natural sounding midrange and excellent bass extension

• Hard wired crossovers featuring proprietary Tannoy capacitors and low loss laminated core inductors delivering a more natural and cohesive sound
• Highly conductive, low resistance internal wiring maximises signal transparency
• High density wood cabinet provides extreme rigidity to control low frequency performance and minimise midrange colouration
• High loss internal damping panels further minimise cabinet colouration
• Rear ported for a richer and deeper bass response
• Oatmeal grille cloth contributes to legacy styling
• Tannoy – 90 years of British sound heritage and innovation
• Designed and manufactured in the U.K.

Specifications

System

Frequency response (-3 dB)1 106 Hz to 20 kHz +/-3 dB
60 Hz to 20 kHz -10 dB
Nominal dispersion 90° conical @ -6 dB points
Power handling (IEC) 50 W continuous, 200 W peak
Sensitivity 85 dB (1 W @ 1 m)
Maximum SPL 102 dB continuous, 108 dB peak
Impedance 8 Ω
Components 1 x 4.5″ dual concentric
full range transducer

Enclosure

Dimensions (H x W x D) 356 x 209 x 156 mm (14 x 8.2 x 6.1″)
Net weight 4.4 kg (9.7 lbs)
Construction Solid wood + MDF
Finish Oiled walnut veneer with
solid walnut trim
Grille Oatmeal grille cloth

Accessory Pack

Parts 8 x rubber feet
2 x foam bung

Stirling $4,200.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• 2 way floorstanding loudspeaker for medium to large sized rooms
• Dual Concentric driver technology provides class-leading coherence and point-source imaging
• 10″ highly efficient driver with 91 dB/Watt sensitivity and 340 Watt peak power handling deliver breath-taking dynamics and realism
• Tulip Waveguide with 25mm aluminium-magnesium dome enhances the point source symmetrical dispersion properties, providing exceptional high frequency clarity and articulation
• Low frequency paper pulp cone with twin roll fabric surround provide natural sounding midrange and bass transient performance
• Handcrafted oiled walnut veneered cabinet with walnut inlays provides a unique and timeless piece of furniture
• capacitors, low loss laminated core inductors and close tolerance wirewound resistors delivering a more natural and cohesive sound
• Custom gold plated bi-wireable binding posts to improve signal transmission and integrity

• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• High density particle board cabinet provides extreme rigidity to control low frequency performance
• Distributed Port system gives powerful and extended low frequency performance
• Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets
• Precision machined gold anodised aluminium adjustment panel metal trim complements the aesthetic of the real wood cabinet
• Specially formulated Prestige wood wax provided to keep cabinet in pristine condition
• Tannoy – 90 years of British sound heritage and innovation
• Designed and manufactured in the U.K.

Specifications

Recommended amplifier power: 20 – 170 W
Continuous power handling: 85 W RMS
Frequency response (-6 dB): 39Hz – 46kHz
Sensitivity: 91dB (2.83 Volts @ 1 m)
Nominal impedance: 8 ohm (5 ohm min)
Drivers: Dual Concentric high-frequency (25mm (1.00) aluminium alloy dome with Tulip Waveguide), Dual Concentric low-frequency (254mm (10.00″) treated paper pulp cone with HE twin roll fabric surround. 42mm (15/8″) edge wound voice coil)
Dispersion: 90 degrees conical
Crossover Frequency: 1.8kHz
Type: Bi-wired, hard-wired passive, low loss 2nd order compensated LF, 2nd order
HF Adjustment: +/- 3dB over 1.8 kHz to 46 kHz shelving

Enclosure

Enclosure type: Distributed Port Volume: 85 L (3 cu ft)
Dimensions: 33.5″ x 15.5″ x 14.5″ (850 x 397 x 368mm)
Weight: 23 kg (50.7 lb)

Turnberry $5,600.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• 2 way floorstanding loudspeaker for medium to large sized rooms
• Dual Concentric driver technology provides class-leading coherence and point-source imaging
• 10″ highly efficient driver with 93 dB/Watt sensitivity and 400 Watt peak power handling deliver breath-taking dynamics and realism
• Tulip Waveguide with 33mm aluminium-magnesium dome enhances the point source symmetrical dispersion properties, providing exceptional high frequency clarity and articulation
• Low frequency paper pulp cone with twin roll fabric surround provide natural sounding midrange and bass transient performance
• Handcrafted oiled walnut veneered cabinet with walnut inlays provides a unique and timeless piece of furniture
• capacitors, low loss laminated core inductors and close tolerance wirewound resistors delivering a more natural and cohesive sound
• Custom gold plated bi-wireable binding posts to improve signal transmission and integrity

• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• High density particle board cabinet provides extreme rigidity to control low frequency performance
• Distributed Port system gives powerful and extended low frequency performance
• Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets
• Precision machined gold anodised aluminium adjustment panel metal trim complements the aesthetic of the real wood cabinet
• Specially formulated Prestige wood wax provided to keep cabinet in pristine condition
• Tannoy – 90 years of British sound heritage and innovation
• Designed and manufactured in the U.K.

Specifications

Frequency response 1 34 Hz – 44 kHz (-6 dB)
Recommended amplifier power 20 – 200 W RMS
Power handling (IEC) 100 W continuous, 400 W peak
Nominal dispersion 90 degrees conical
Sensitivity 2 93 dB (1 W @ 1 m)
Impedance 8 Ω
Maximum SPL 2 113 dB continuous, 119 dB peak
Components
Low frequency dual concentric 254 mm (10″) with paper pulp cone with twin roll impregnated
fabric surround, 52 mm (2″) edge wound voice coil
High frequency dual concentric 33 mm (1.3″) aluminium/magnesium alloy dome with edge
wound voice coil
Crossover Frequency 1.3 kHz
Type Bi-wired, hard-wired passive, low loss 2nd order low pass,
2nd order high pass
Adjustment ±3 dB over 1.3 kHz to 44 kHz shelving

Enclosure

Enclosure type: Distributed Port Volume: 85 L (3 cu ft)
Dimensions: 33.5″ x 15.5″ x 14.5″ (850 x 397 x 368mm)
Weight: 23 kg (50.7 lb)

Accessory Pack

Bi-wire bridge connectors
Prestige wood wax
Carpet protectors
Ajustable feet
Welcome pack documentation

Kensington $12,600.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• 2 way floorstanding loudspeaker for large sized rooms
• Dual Concentric driver technology provides class-leading coherence and point-source imaging
• 10″ highly efficient driver with 93 dB/Watt sensitivity and 500 Watt peak power handling deliver breath-taking dynamics and realism
• PepperPot WaveGuide powered by Tannoy Alnico magnet system enhances the point source symmetrical dispersion properties
• Aluminium-magnesium alloy diaphragm and Mylar surround compression driver delivers exceptional clarity and articulation throughout the high frequency range
• Handcrafted oiled walnut veneered cabinet with walnut inlays provides a unique and timeless piece of furniture
• capacitors, low loss laminated core inductors and thick film resistors delivering a more natural and cohesive sound
• bi-wireable binding posts to improve signal transmission and integrity

• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• High density birch ply and particle board cabinet provides extreme rigidity to control low frequency performance
• Distributed Port system gives powerful and extended low frequency performance
• Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets
• Precision machined gold anodised aluminium adjustment panel metal trim complements the aesthetic of the real wood cabinet
• Specially formulated Prestige wood wax provided to keep cabinet in pristine condition
• Tannoy – 90 years of British sound heritage and innovation
• Designed and manufactured in the U.K.

Specifications

Frequency Response  29 Hz – 27 kHz

Sensitivity  93 dB

RMS Output Power   250 W

Impedance   8 Ohm

Driver Type  52 mm Aluminium/Magnesium Tweeter, 250 mm Paper Woofer

PMPO Output Power  500 W

Physical

Width   406 mm

Depth   338 mm

Weight Approximate  37 kg

Height  1100 mm

Dimensions (HWD)  43.3″ x 15.9″ x 13.3″  1100 mm x 406 mm x 338

GRF $16,100.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• 2 way floor-standing high-end loudspeaker for large sized rooms
• Dual Concentric driver technology provides class-leading coherence and point-source imaging
• 12″ highly efficient driver with 560 Watt peak power handling delivers breath-taking dynamics and realism
• PepperPot WaveGuide powered by Tannoy Alnico magnet system enhances the point source symmetrical dispersion properties
• Aluminium-magnesium alloy diaphragm and Mylar surround compression driver delivers exceptional articulation throughout the high frequency range
• Handcrafted oiled walnut veneered cabinet provides a unique and timeless piece of furniture
• Specially treated crossovers featuring ICW ClarityCap* capacitors, low loss laminated core inductors and thick film resistors delivering a more natural and cohesive sound

• Heavy duty electro-plated brass NextGen WBT* bi-wireable binding posts to improve signal transmission and integrity
• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• High density birch ply cabinet provides extreme rigidity to control low frequency performance
• Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets
• Tannoy – 90 years of British sound heritage and innovation
• Designed and manufactured in the U.K.

Specifications

Recommended amplifier power 20 – 280 Watts RMS
Continuous power handling 140 Watts RMS
Peak power handling 560 Watts
Sensitivity 95 dB (2.83 Volts @ 1 m)
Nominal impedance 8 ohm
Minimum impedance 5 ohm
Frequency response 24 Hz – 27 kHz (-6 dB)
Dispersion 90 degrees conical
Dual Concentric Drive Unit
Low frequency 300 mm (12″) with paper pulp cone and
twin roll impregnated fabric surround.
52 mm (2″) round wire voice coil
High frequency 52 mm (2″) aluminium/magnesium alloy
dome with round wire voice coil
Crossover
Type Bi-wired, hard wired passive, low loss.
Time compensated. 2nd order low pass,
2nd order high pass. Cryogenically treated
Crossover frequency 1.1 kHz
Adjustments ± 3 dB over 1.1 kHz to 27 kHz shelving
+ 2 dB to -6 dB per octave over 5 kHz to 27 kHz slope

Enclosure

Enclosure type Dual rear ported
Volume 210 litres (7.4 cu. ft)
Dimensions (H x W x D) 1240 x 550 x 465 mm
(48.8 x 21.7 x 18.3″)
Construction High density fibre board and birch ply,
walnut veneered, with solid walnut trim,
25 mm (2″) thick front baffle. Internally
cross braced and heavily damped.

Canterbury $21,000.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• 2 way floorstanding loudspeaker for large sized rooms
• Dual Concentric driver technology provides class-leading coherence and point-source imaging
• 15″ highly efficient driver with 96 dB/Watt sensitivity and 600 Watt peak power handling deliver breath-taking dynamics and realism
• PepperPot WaveGuide powered by Tannoy Alnico magnet system enhances the point source symmetrical dispersion properties
• Aluminium-magnesium alloy diaphragm and Mylar surround compression driver delivers exceptional clarity and articulation throughout the high frequency range
• Handcrafted oiled walnut veneered cabinet with hand-selected burr walnut inlays provides a unique and timeless piece of furniture
• capacitors, low loss laminated core inductors and thick film resistors delivering a more natural and cohesive sound
• bi-wireable binding posts to improve signal transmission and integrity

• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• High density birch ply cabinet provides extreme rigidity to control low frequency performance
• Variable Distributed Port system allows low frequency output to be tuned to suit any room dimensions
• Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets
• Precision machined gold anodised aluminium metal trims complement the aesthetic of the real wood cabinet
• Specially formulated Prestige wood wax provided to keep cabinet in pristine condition
• Tannoy – 90 years of British sound heritage and innovation
• Designed and manufactured in the U.K.

Specifications

Frequency response 1 28 Hz – 27 kHz (-6 dB)
Recommended amplifi er power 20 – 300 W RMS
Power handling (IEC) 150 W continuous, 600 W peak
Nominal dispersion 90 degrees conical
Sensitivity 2 96 dB (1 W @ 1 m)
Impedance 8 Ω
Maximum SPL 2 118 dB continuous, 124 dB peak
Components
Low frequency dual concentric 380 mm (15″) with paper pulp cone and twin roll impregnated
fabric surround, 52 mm (2″) round wire voice coil
High frequency dual concentric 52 mm (2″) aluminium/magnesium alloy dome with round wire
voice coil
Crossover
Frequency 1.1 kHz
Type Bi-wired, hard wired passive, low loss. Time compensated
2nd order low pass, 2nd order high pass
Adjustment ±3 dB over 1.1 kHz to 27 kHz shelving,
+2 dB to -6 dB per octave over 5 kHz – 27 kHz slope

Enclosure

Type Dual variable distributed ported
Connectors 5 x 4 mm 24 ct Tannoy customized binding posts
Dimensions (HWD) 480 x 680 x 1100 mm
(18.9 x 26.8 x 43.3″)
Net weight 68 kg (149.6 lbs)
Construction 19 mm (¾ “) MDF with plywood internal bracing, heavily damped
Finish Walnut veneer and high acoustic transparency nylon grill cover

Accessory Pack

Bi-wire bridge connectors
Prestige wood wax
Felt pad
Grille key
Metal feet
Welcome pack documentation

Westminster Royal MKII $35,000.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• 2 way horn loaded floorstanding loudspeaker for large sized rooms
• Dual Concentric driver technology provides class-leading coherence and point-source imaging
• 15″ highly efficient driver with 99 dB/Watt sensitivity and 700 Watt peak power handling deliver breath-taking dynamics and realism
• PepperPot WaveGuide powered by Tannoy Alnico magnet system enhances point source symmetrical dispersion properties
• Aluminium-magnesium alloy diaphragm and Mylar surround compression driver delivers exceptional clarity and articulation throughout high frequency range
• Handcrafted oiled walnut veneered cabinet with hand-selected burr walnut inlays provides a unique and timeless piece of furniture
• capacitors, low loss laminated core inductors and thick film resistors delivering a more natural and cohesive sound
• bi-wireable binding posts to improve signal transmission and integrity

• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• High density birch ply cabinet provides extreme rigidity to control low frequency performance
• Front midrange horn and rear loaded compound low frequency horn provide exceptionally high sensitivity and dynamics
• Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets
• Precision machined gold anodised aluminium metal trims complement the aesthetic of the real wood cabinet
• Specially formulated Prestige wood wax provided to keep cabinet in pristine condition
• Tannoy – 90 years of British sound heritage and innovation
• Designed and manufactured in the U.K

Specifications

System
Frequency response 1 18 Hz – 27 kHz (-6 dB)
Recommended amplifi er power 20 – 350 W RMS
Power handling (IEC) 175 W continuous, 700 W peak
Nominal dispersion 90 degrees conical
Sensitivity 2 99 dB (1 W @ 1 m)
Impedance 8 Ω
Maximum SPL 2 121 dB continuous, 127 dB peak
Components
Low frequency dual concentric 380 mm (15″) with paper pulp cone and twin roll impregnated
fabric surround, 52 mm (2″) round wire voice coil
High frequency dual concentric 52 mm (2″) aluminium/magnesium alloy dome with round wire
voice coil
Crossover
Frequency B200 Hz acoustics, 1.0 kHz electrical
Type Bi-wired, hard wired passive, low loss. Time compensated.
2nd order low pass, 2nd order high pass
Adjustment ±3 dB over 1.0 kHz to 27 kHz shelving,
+2 dB to 6 dB per octave over 5 kHz – 27 kHz slope

Enclosure

Type Compound horn
Connectors 5 x 4 mm 24 ct Tannoy customized binding posts
Dimensions (HWD) 560 x 980 x 1395 mm
(22.1 x 38.6 x 54.9″)
Net weight 140.2 kg (308.4 lbs)
Construction 19 mm (¾ “) MDF with plywood internal bracing, heavily damped
Finish Walnut veneer and high acoustic transparency nylon grill cover

Accessory Pack

Bi-wire bridge connectors
Prestige wood wax
Felt pad
Grille key
Metal feet
Welcome pack documentation

Supertweeter $2,800.00 (Each) Must be purchased in  pairs

Click image to enlarge

Features

• Extended frequency response tweeter for Tannoy PRESTIGE GR range and other legacy speaker models to enhance reproduction of wide band digital audio formats
• 25 mm SuperTweeter with magnesium alloy dome and neodymium magnet system extends response to 61 kHz to complement performance of wideband digital formats and increase resolution and detail
• Very wide system audio bandwidth minimises phase error artefacts to preserve coherence and detail of sound image
• Low loss crossovers featuring ICW ClarityCap* capacitors, air cored inductors and close tolerance non-inductive thick film resistors deliver a more natural and transparent sound
• Sensitivity and crossover point adjustable by gold plated brass setting screws to match any Tannoy model
• Tweeter pod angle adjustment to compensate for differing cabinet heights

• Easy setup for different loudspeaker models with included calibrated location gauge
• Gold plated brass binding posts improve signal transmission and integrity
• Oxygen free copper with high purity silver plating aids resolution of fine detail
• Earth binding post provides grounding to reduce radio interference and improve clarity
• Hand crafted American Walnut plinth with gold anodised tweeter housing and trims to match PRESTIGE GR finish and provide a unique and timeless appearance
• Tannoy – 90 years of British sound heritage and innovation
• Designed and engineered in United Kingdom

Specifications

Frequency response (-6 dB) 62 kHz, usable output (-18 dB) to 100 kHz
Power handling
RMS 175 W
Peak 700 W
Recommended amplifier power Up to 350 W RMS
Maximum sensitivity (2.83 V @ 1 m) 95 dB
Impedance 8 Ω
Crossover type 3rd order high pass
Crossover frequency 14, 16 or 18 kHz adjustable
Level adjustment 89 dB, 90.5 dB, 92 dB, 93.5 dB, 95 dB
Components 25 mm diameter 44 micron magnesium alloy dome, neodymium magnet system

Enclosure

Connectors Positive, negative, ground terminals
Dimensions (HWD) 133 x 147 x 210 mm (5.2 x 5.8 x 8.2″)
Net weight 1.3 kg (2.9 lbs)
Finish
Prestige GR Walnut / gold anodised machined aluminium
ST-300MG Satin black / silver anodised machined aluminium

Accessory Pack

Bi-wire bridge connectors
Prestige wood wax
Felt pad
Grille key
Metal feet
Welcome pack documentation

Kingdom Royal MKII $56,000.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• 4 way floorstanding loudspeaker for large sized rooms
• 12″ Dual Concentric driver provides class-leading coherence and point-source imaging
• Supplementary long throw 15″ paper cone bass driver gives exceptionally deep and dynamic bass performance
• 25 mm SuperTweeter with magnesium alloy dome and neodymium magnet system extends response to 61 kHz to accurately reproduce the leading edge of notes
• Dual Concentric driver features 75 mm aluminium-alloy diaphragm and Mylar surround compression driver to deliver exceptional clarity and articulation in the mid to high frequency range
• Very low 700 Hz crossover point between Dual Concentric midrange to compression driver greatly enhances vocal quality
• Highly efficient 96 dB/Watt sensitivity and 1,200 Watt peak power handling deliver breath-taking dynamics and realism
• Cryogenically treated crossovers featuring ICW ClarityCap* capacitors, low loss laminated core inductors and thick film resistors
• Crossovers decoupled from cabinet vibrations by 3-point suspension system to deliver a more natural and cohesive sound

• Neotech PC-OCC* internal wiring with 99.99% high purity solid silver wiring on SuperTweeter gives excellent signal transparency
• Heavy duty electro-plated brass NextGen WBT* bi-wireable binding posts to improve signal transmission and integrity
• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• Metallic speckled satin paint finish cabinet with walnut veneered side cheeks provide a unique and timeless piece of furniture
• High density birch ply and laminated particle board cabinet provides extreme rigidity to control low frequency performance
• Large diameter rear port provides very low frequency tuning with minimal turbulence for accurate bass reproduction
• Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets
• Precision cast and machined gold anodised aluminium metal trims complement the aesthetic of the real wood cabinet
• Tannoy – 90 years of British sound heritage and innovation
• Designed and engineered in the U.K.

Specifications

Sensitivity: 96 dB for 2.83 V at 1 m
Nominal impedance: 8 ohm
Frequency response: 24 Hz – 61 kHz (-6 dB)

Recommended amplifier power: 20 to 600 W RMS per channel
Power rating: 300 W RMS, 1,200 W peak
Maximum SPL: 120 dB at 1 m for 300 W RMS. 126 dB at 1 m for 1,200 W peak
Total harmonic distortion: Less than 1% at 300 W RMS (50 Hz to 20 kHz)
Dispersion: 90 degree conical

Crossover frequencies
120 Hz bass to Dual Concentric™ midrange
700 Hz Dual Concentric™ midrange to compression tweeter
17 kHz Dual Concentric™ tweeter to SuperTweeterTM

Crossover adjustments
Dual Concentric™ energy /- 3.0 dB in 5 steps, 700 Hz- 17 kHz
SuperTweeter™ energy /- 3.0 dB in 5 steps, 17 kHz- 61 kHz

Crossover type
Bi-wired, hard-wired passive, low loss. All connections silver soldered. 99.9999% purity PCOCCTM wiring, except for SuperTweeter™ 99.997% purity single strand custom silver cable. Complete assembly deep cryogenically treated. Free floating isolation system. All crossover slopes 2nd order, except for SuperTweeter™ 1st order high pass

Low-frequency driver
15″ (380 mm) nominal diameter with treated paper cone.
3″ (75 mm) diameter voice coil

Dual Concentric
12″ (300 mm) nominal diameter Dual Concentric™, with 2″ (52 mm) midrange voice coil and treated paper cone.
High-frequency 3″ (75 mm) diameter aluminum alloy dome, deep cryogenically treated

Supertweeter
1″ (25 mm) diameter 64 micron magnesium alloy dome, ceramic coated. Neodymium magnet system. Plasma bonded voice coil.

Enclosure

Accessory Pack

Bi-wire bridge connectors
Prestige wood wax
Felt pad
Grille key
Metal feet
Welcome pack documentation

Kingdom Royal Carbon Black $56,000.00 (Each) Must be purchased in pairs

Click image to enlarge

Features

• 4 way floorstanding loudspeaker for large sized rooms
• 12″ Dual Concentric driver provides class-leading coherence and point-source imaging
• Supplementary long throw 15″ paper cone bass driver gives exceptionally deep and dynamic bass performance
• 25 mm SuperTweeter with magnesium alloy dome and neodymium magnet system extends response to 61 kHz to accurately reproduce the leading edge of notes
• Dual Concentric driver features 75 mm aluminium-alloy diaphragm and Mylar surround compression driver to deliver exceptional clarity and articulation in the mid to high frequency range
• Very low 700 Hz crossover point between Dual Concentric midrange to compression driver greatly enhances vocal quality
• Highly efficient 96 dB/Watt sensitivity and 1,200 Watt peak power handling deliver breath-taking dynamics and realism
• Cryogenically treated crossovers featuring ICW ClarityCap* capacitors, low loss laminated core inductors and thick film resistors
• Crossovers decoupled from cabinet vibrations by 3-point suspension system to deliver a more natural and cohesive sound

• Neotech PC-OCC* internal wiring with 99.99% high purity solid silver wiring on SuperTweeter gives excellent signal transparency
• Heavy duty electro-plated brass NextGen WBT* bi-wireable binding posts to improve signal transmission and integrity
• Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity
• Metallic speckled satin paint finish cabinet with walnut veneered side cheeks provide a unique and timeless piece of furniture
• High density birch ply and laminated particle board cabinet provides extreme rigidity to control low frequency performance
• Large diameter rear port provides very low frequency tuning with minimal turbulence for accurate bass reproduction
• Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets
• Precision cast and machined gold anodised aluminium metal trims complement the aesthetic of the real wood cabinet
• Tannoy – 90 years of British sound heritage and innovation
• Designed and engineered in the U.K.

Specifications

Sensitivity: 96 dB for 2.83 V at 1 m
Nominal impedance: 8 ohm
Frequency response: 24 Hz – 61 kHz (-6 dB)

Recommended amplifier power: 20 to 600 W RMS per channel
Power rating: 300 W RMS, 1,200 W peak
Maximum SPL: 120 dB at 1 m for 300 W RMS. 126 dB at 1 m for 1,200 W peak
Total harmonic distortion: Less than 1% at 300 W RMS (50 Hz to 20 kHz)
Dispersion: 90 degree conical

Crossover frequencies
120 Hz bass to Dual Concentric™ midrange
700 Hz Dual Concentric™ midrange to compression tweeter
17 kHz Dual Concentric™ tweeter to SuperTweeterTM

Crossover adjustments
Dual Concentric™ energy /- 3.0 dB in 5 steps, 700 Hz- 17 kHz
SuperTweeter™ energy /- 3.0 dB in 5 steps, 17 kHz- 61 kHz

Crossover type
Bi-wired, hard-wired passive, low loss. All connections silver soldered. 99.9999% purity PCOCCTM wiring, except for SuperTweeter™ 99.997% purity single strand custom silver cable. Complete assembly deep cryogenically treated. Free floating isolation system. All crossover slopes 2nd order, except for SuperTweeter™ 1st order high pass

Low-frequency driver
15″ (380 mm) nominal diameter with treated paper cone.
3″ (75 mm) diameter voice coil

Dual Concentric
12″ (300 mm) nominal diameter Dual Concentric™, with 2″ (52 mm) midrange voice coil and treated paper cone.
High-frequency 3″ (75 mm) diameter aluminum alloy dome, deep cryogenically treated

Supertweeter
1″ (25 mm) diameter 64 micron magnesium alloy dome, ceramic coated. Neodymium magnet system. Plasma bonded voice coil.

Enclosure

Accessory Pack

Bi-wire bridge connectors
Prestige wood wax
Felt pad
Grille key
Metal feet
Welcome pack documentation

Tannoy manufacturer web site

Go to Apple Tree home