Plinius Power Amplifiers

Back to Plinius
Back to amplifiers
Back to home

NT-505 Network Player Preamp

Plinius Power Amplifiers
36,000.00

Plinius P-10 Power Amplifier 

Plinius_P-10_front
$6,750.00
Plinius Power AmplifiersPlinius_Reference_A_300_rear

Reference A-300 Power Amplifier

The Reference A-300 celebrates and continues the Plinius tradition of building world-class amplifiers that deliver powerful, pure sound, are built to last and look simply stunning.

The Reference A-300 is an evolution of previous models. Throughout the design process each and every part has been reviewed, evaluated and refined. Every subsection of the electronics boasts changes to components, specification, layout and interconnection resulting in a truly sophisticated amplifier.

Plinius A-300 Reference Power Amplifier Specifications

POWER

300 watts RMS per channel into 8 ohms

MONO OUTPUT

1000 watts RMS into 8 ohms 1800 watts RMS into 4 ohms

FREQUENCY RESPONSE

20Hz to 20kHz ±0.5dB -3dB at 70kHz

DISTORTION

<0.03% THD at rated power

CURRENT OUTPUT

100A short duration peak per channel Fuse protected

HUM & NOISE

100dB below rated output 20Hz to 20kHz A-weighted

INPUT IMPEDANCE
47k ohms

GAIN

RCA Inputs: 32dB, Balanced Inputs: 38dB

POWER/CURRENT CONSUMPTION

1400W, 4.8A (1100W) Class A Idle, 0.8A (184W) Class AB Idle/Standby

DIMENSIONS

Height: 285mm (11.25″)
Width: 510mm (20″)
Depth: 550mm (21.75″)
Weight: 57kg (125lbs)

Plinius_P-10_frontPlinius_P-10_rear

P10 Power Amplifier

The P10 has a level of sophistication rarely found in such a cost effective product. This amplifier has separate input and driver stage power supply regulation and it is an amplifier capable of true high-end performance.

The large toroidal transformer will allow the P10 to deliver power levels in excess of 200 watts per channel into 8 Ohms. Difficult speaker loads are driven with ease to the most satisfying levels, while maintaining control and finesse.

Plinius A-300 Reference Power Amplifier Specifications

POWER

200 watts RMS per channel into 8 ohms.
300 watts RMS per channel into 4 ohms.
Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion

FREQUENCY RESPONSE

20Hz to 20kHz +/–2dB
-3dB at 5Hz and –3dB at 70kHz

DISTORTION

Typically <0.05% THD at rated power
0.2% THD and IM worst case prior to clipping

CURRENT OUTPUT

40A short duration peak per channel
Fuse protected

SLEW RATE

50V/µs

HUM & NOISE

90dB below rated output 20Hz to 20kHz unweighted

INPUT IMPEDENCE

47k ohms

GAIN

RCA Inputs: 32dB
XLR Inputs: 38dB

POWER/CURRENT CONSUMPTION

600W
0.4A (92W)
Class AB Idle
0.14A (32W) Standby

DIMENSIONS

Height: 120mm (4 3/4”)
Width: 450mm (17 3/4”)
Depth: 400mm (15 3/4”)
Weight: 14kg (30lbs)