Click image to enlarge

MPS2520P

Right/Centre/Left

$4,700 (each)

MPS2520P Studio Monitor – New Edition

The MPS2520P studio monitor are featured with a total of 5 loudspeaker units providing impressive sound impact in an ultra-compact format.

The dual channel power amplifiers drive the bass-midrange and high frequency sections with great precision and full control of signal dynamics.

The 5.25” bass-midrange drivers are tuned for sealed box with 0.707 box Q to provide an absolute optimal system step response control. Combined with triple stacked tweeters operating down to 1.2Khz, makes the MPS2520P sound response become fast and sharp, with superior qualities to control reference recordings, editing, processing, and master mixing for music and movie productions.

MPS2520P are designed for easy system setup using the build in high pass filter for smooth integration with M&K subwoofers.

M&K MPS2520P Speaker Specifications

• Amplifier power bass-midrange: 200watt RMS/400watt peak

• Amplifier power high frequency: 180watt RMS/360watt peak
• Bass/Midrange: 2 x 5.25 Glassfibre
• High frequency Drivers: 3 x 1,1” soft fabric dome
• Frequency Response: 80-12KHz +/-1dB / 12-20KHz +/-2dB
• Total Harmonic distortion: 0.002% into 4 ohms LF Channel / 0.03% into 4 ohms HF channel
• Signal to noise ratio: 100dB
• AC power consumption: Standby/Average/Max 17W, 45W, 360W
• AC line voltage: 115VAC/60Hz 5A – 230VAC/60Hz 3.15A
• Input impedance unbalanced: 11Kohm / balanced 22Kohm
• Input sensitivity unbalanced 1 00mV 90dB 1m / balanced 200mV 90dB 1m
• Max output level: 110dB/100Hz
• Max input: 24dBu balanced
• High pass filter: Fixed 80 Hz (24dB)
• Vertical directivity control: Wide/Narrow – 50/30 Deg.
• Dimensions
• Dimensions HxWxD: 12.8 x 10.6 x 15.8” / 327 x 270 x 401 mm
• Weight: 39.6 lbs / 18 kg

Click image to enlarge

MPS1620P

Powered Monitor Speaker

$2,200.00 (each)

The MPS 1620P studio monitor feature a long stroke 6.5” driver and a low compression 1” dome tweeter to provide impressive sound impact for high resolution “sound productions”

The dual channel power amplifiers drive the bass-midrange and high frequency sections with great precision and full control of signal dynamics.

The MPS1620P can operate both as a sealed or a ported loudspeaker due to the removeable “port plug system” at the rear side of speaker.

When operating with subwoofer, the choice of sealed box configuration and filter set to “normal” will provide the classic M&K Sound sub/sat crossover configuration, while when using the MPS1620P as a stand-alone monitor, the ported configuration with filter set to “full-range” will extend bass response and provider precise “broad band” response for near field monitor applications.

MPS1620P is a flexible high precision studio monitor to use for reference recordings, editing, processing, and master mixing for music and movie productions.

M&K MPS1620P Speaker Specifications

• Amplifier power bass-midrange: 100watt RMS/200watt peak

• Amplifier power high frequency: 50watt RMS/100watt peak
• Bass/Midrange: 1 x 6,5” polypropylene woofer
• High frequency Drivers: 1 x 1” soft dome tweeter
• Frequency Response: Sealed/normal setting 80-22KHz +/-2dB / (wall or console loaded) 45-22Khz +/-2dB
• Ported/normal setting 45-22KHz +/-2dB
• Ported/full range setting / (wall or console loaded) 35-22Khz +/-2dB
• Total Harmonic distortion: 0,025% into 8 ohms LF channel / 0.025% into 4 ohms HF channel
• Signal to noise ratio: 100dB
• AC power consumption: Standby/Average/Max (15W, 30W, 240W)
• AC line voltage: 115VAC/60Hz 2A – 230VAC/50Hz 1A
• Input impedance: unbalanced 11kohm / balanced 22Kohm
• Input sensitivity unbalanced 100mV 88dB 1m / balanced 200mV 88dB 1m
• Max output level: 106dB/100Hz
• Max input: 24dBu balanced
• High pass filter: Fixed 80 Hz (24dB)
• Dimensions
• Dimensions HxWxD: 12.6 x 8.3 x 11.6” / 321 x 213 x 297 mm